Each 8x periphery module consists of a
terminal
and an
electronic module
.
1
Terminal module
2
Electronic module
The
terminal
module serves to carry the electronic module, contains the backplane bus
with power supply for the electronic, the DC 24V power section supply and the staircase-
shaped terminal for wiring. Additionally the terminal module has a locking system for
fixing at a mounting rail. By means of this locking system your system may be assembled
outside of your switchgear cabinet to be later mounted there as whole system.
The functionality of a periphery module is defined by the
electronic module
, which is
mounted to the terminal module by a sliding mechanism. With an error the defective elec-
tronic module may be exchanged for a functional module with standing installation. At the
front side there are LEDs for status indication. For simple wiring each module shows cor-
responding connection information at the front and at the side.
Each 16x periphery module consists of an
electronic unit
and a
terminal block
.
1
2
1
Electronic unit
2
Terminal block
8x periphery modules
Terminal module
Electronic module
16x periphery modules
VIPA System SLIO
Basics and mounting
System conception > Components
HB300 | FM | 050-1BB30 | en | 20-40
11
