Because you can deactivate all safety attitudes with the
VNC server, you should use these exclusively for start-up!
For this reason the VNC server is on delivery deactivated.
Due to software reasons VIPA does not support the VNC
server function!
The VNC connection establishment has the following approach:
1.
Start the VNC server via
‘Start
è
Programs
è
Tools
è
winvnc’
or activate the VNC server in the
Startup-Manager
under
"Autostart".
ð
To show the server has been started, the symbol
Efon vnc
appears in the task bar.
2.
Now start the VNC client vncviewer.exe on your PC.
3.
Click on [Options] and deactivate the field "Emulate 3 Buttons..."
like shown at Mouse.
4.
Enter the IP address of the Panel PC at VNC server. Click on
[OK] and enter the password vipatp. You can change the pass-
word over the configuration file, for this execute vncconfig.exe.
Now a VNC connection is established and the screen content of
the Panel PC is monitored within a window.
Closing the VNC window terminates the VNC connection, the server
keeps running.
Establishing a VNC con-
nection
VIPA HMI PPC021 CE
Deployment Panel PC
Integrated server > VNC server
HB160 | PPC | 67S-PNJ0 | GB | 15-30
34
