4.
Click on [Options] and deactivate the field "Emulate 3 Buttons..."
like shown at
Mouse.
5.
Enter the IP address of the Touch Panel at
VNC server
. Click on
[OK] and enter the password vipatp. You can change the pass-
word over the configuration file, for this execute vncconfig.exe.
Now a VNC connection is established and the screen content of
the Touch Panel is monitored within a window.
Closing the VNC window terminates the VNC connection, the server
keeps running.
3.7 Access to the network resources
The Touch Panel allows you to access shared resources in a Micro-
soft network like drives and printer. Here you may assign existing
public directories or printer in the network to local directories or printer
in the Touch Panel.
Condition for this is that you are logged in to the network with your
user name and password. The assignment of a network resource is
performed in the Touch Panel via the command console "Command
Prompt". Start the command console with
‘START
è
Programs
è
Command Prompt’
.
The access to the network resource is performed with the commands
Net view
and
Net use
.
Shared resources of a network PC can be listed by the command: \>
net view PC-Name
Overview
List released resources
VIPA HMI
Deployment Touch Panel
Access to the network resources
HB160 | TP | 62I-JID0 | GB | 15-36
42
