VS-616PS5 Programming Manual
9
Main Menu:Initialize
<ENTER>
A
Initialization Parameters
A1
Initialization Set-up
This parameter allows the “masking” of parameters according to user level. See the
following table:
Use this parameter to reset the inverter to its factory default settings. Initialize the
inverter after changing the control PCB, or after selecting inverter capacity
(O2-04)
.
This parameter allows password entry to view masked parameters.
A1-01 Parameter Access Level
Q
Setting
Description
0
Operation Only
2
Quick Start Level
(factory default)
- For maintenance-level programming.
3
Basic Level - For basic programming in most applications.
4
Advanced Level - For advanced programming in special applications.
A1-03 Operator Status
Q
Setting
Description
0
No Initialization
(factory default)
.
2220
2-Wire Initialization - terminal 1 becomes FWD run command and
terminal 2 becomes REV run command. All other parameters are
reset to their original factory default settings.
3330
3-Wire Initialization - terminal 1 becomes run command, terminal 2
becomes stop command and terminal 3 becomes FWD/REV run
selection. All other parameters are reset to their original factory
default settings.
A1-04 Password Entry
Q
Section A: Initialization Parameters
A1 Initialization Set-up
