12.1 Starting up Welding Source in Diagnosis Mode
12-1
HW0480311
HW0480311
12
Diagnosis Function
MOTOWELD-EH500 has a Diagnosis mode to confirm the software version, the number of
occurrence of welding source error, and DIP switch set status.
12.1
Starting up Welding Source in Diagnosis Mode
To start up the welding source in the Diagnosis mode, turn OFF the main power of
MOTOWELD-EH500 once, and turn ON the main power again while pressing the "Record"
button.
The diagnosis information is displayed in the 7-segment LED indicators on the welding source
front panel once the Diagnosis mode is launched.
The set status of DIP switch is displayed in the 7-segment LED indicators when the Diagnosis
mode is launched.
Fig. 15 Panel at Launch of MOTOEWELD-EH500 Diagnosis Mode
Wire m/min
Type
ON
OFF
Power
Warning
Search
Record
Gas
Common PRM Select
PRM Select
PRM Set
Weld, Type
File No.1
File No.2
File No.3
User File Select
L
R
Auto Adjustment
/Individual
Auto Adj.
V
A
V
A
Wire m/min
Type
ON
OFF
Power
Warning
Search
Record
Gas
Common PRM Select
PRM Select
PRM Set
Weld, Type
File No.1
File No.2
File No.3
User File Select
L
R
Auto Adjustment
/Individual
Auto Adj.
88/129
