H.3 User Setting Table
Use the Verify Menu to see which parameters have been changed from their original default settings
below the parameter number indicates that the parameter setting can be changed during run.
Parameter names in
bold face type
are included in the Quick Setting Group of parameters.
No.
Name
User
Setting
A1-06
Application Preset
b1-03
Stopping Method Selection
b1-04
Reverse Operation Selection
b2-03
DC Injection Braking Time at Start
b2-04
DC Injection Braking Time at Stop
b3-01
Speed Search Selection at Start
b3-02
Speed Search Deactivation Current
b3-03
Speed Search Deceleration Time
b3-04
V/f Gain during Speed Search
b3-05
Speed Search Delay Time
b3-06
Output Current 1 during Speed Search
b3-07
Output Current 2 during Speed Search (Speed
Estimation Type)
b3-08
Current Control Gain during Speed Search (Speed
Estimation Type)
b3-09
Current Control Integral Time during Speed Search
(Speed Estimation Type)
b3-10
Speed Search Detection Compensation Gain
b3-11
Speed Search Method Switching Level (Speed
Estimation Type)
b3-12
Minimum Current Detection Level during Speed
Search
b3-14
Bi-Directional Speed Search Selection
b3-17
Speed Search Restart Current Level
b3-18
Speed Search Restart Detection Time
b3-19
Number of Speed Search Restarts
b3-24
Speed Search Method Selection
b3-25
Speed Search Wait Time
b3-27
Start Speed Search Select
b5-01
PI Function Setting
b5-02
Proportional Gain Setting (P)
b5-03
Integral Time Setting (I)
b5-04
Integral Limit Setting
b5-06
PI Output Limit
b5-07
PI Offset Adjustment
b5-08
PI Primary Delay Time Constant
b5-09
PI Output Level Selection
b5-10
PI Output Gain Setting
No.
Name
User
Setting
b5-11
PI Output Reverse Selection
b5-12
PI Feedback Loss Detection Selection
b5-13
PI Feedback Loss Detection Level
b5-14
PI Feedback Loss Detection Time
b5-15
PI Sleep Function Start Level
b5-16
PI Sleep Delay Time
b5-17
PI Accel/Decel Time
b5-18
PI Setpoint Selection
b5-19
PI Setpoint Value
b5-20
PI Setpoint Scaling
b5-34
PI Output Lower Limit
b5-35
PI Input Limit
b5-36
PI Feedback High Detection Level
b5-37
PI Feedback High Detection Time
b5-38
PI Setpoint User Display
b5-39
PI Setpoint Display Digits
b5-40
Frequency Reference Monitor Content during PI
b5-46
PI Setpoint Monitor Unit Selection
b5-47
Reverse Operation Selection 2 by PI Output
C1-01
Acceleration Time 1
C1-02
Deceleration Time 1
C1-09
Fast-Stop Time
C2-01
S-Curve Characteristic at Accel Start
C2-02
S-Curve Characteristic at Accel End
C4-01
Torque Compensation Gain
C6-02
Carrier Frequency Selection
C6-05
Carrier Frequency Proportional Gain
d1-01
Frequency Reference 1
d1-02
Frequency Reference 2
d1-03
Frequency Reference 3
d1-04
Frequency Reference 4
d2-02
Frequency Reference Lower Limit
d2-03
Master Speed Reference Lower Limit
H.3 User Setting Table
YASKAWA ELECTRIC SIEP YAIZ1B 01E YASKAWA AC Drive – Z1000 Bypass Technical Manual
449
H
Quick Reference Sheet
