Contents
This document details changes made in Z1000 software
PRG:1013
and includes new parameters,
settings, and displays.
The technical specifications of Z1000 models CIMR-ZU4A0361A and CIMR-4A0414A are revised.
Please use this information along with the
Z1000 User Manual (TOEP C710606 45)
packaged with
the product.
The user should have a thorough understanding of all safety precautions and operating instructions
prior to using Z1000 drive.
REPLACE FIGURE 1.6 ON PAGE 32......................................................................4
REPLACE PANEL CUT-OUT DIMENSIONS ON PAGES 42 AND 43....................6
REPLACE TABLE 3.3 PAGES 79 AND 80...........................................................11
REPLACE SECTION 4.3 BEGINNING ON PAGE 106..........................................13
REPLACE TABLE 6.2 ON PAGE 239...................................................................16
REPLACE TABLE A.6 ON PAGE 249...................................................................18
REPLACE TABLE D.1 ON PAGE 328...................................................................20
REPLACE TABLE D.2 ON PAGE 333...................................................................22
REPLACE TABLE D.5 ON PAGE 336...................................................................23
REPLACE TABLE D.7 ON PAGE 338...................................................................24
Applicable Models:
This document applies to all Z1000 drives with software version PRG:1013 or higher. The software
version is listed on the nameplate located on the side of the drive, and can also be viewed by displaying monitor
parameter U1-25.
YASKAWA TOEP YAISUP 04A YASKAWA AC Drive – Z1000 User Manual Supplement
3
