12
O R I G I N A L I N S T R U C T I O N S
GB
Note! Observe the product throughout the entire work cycle. If you notice any signs of abnormal operation, e.g. suspicious sounds,
increased noise, increased vibrations or a sense of suspicious smell, immediately switch o
ff
the product by pressing the switch,
disconnect the plug from the power socket, wait until all moving parts have stopped and only then try to locate the failure.
Product maintenance
NOTE! Prior to each cleaning switch o
ff
the product, unplug the power cord from the outlet, wait until it has cooled down, and then
start the maintenance procedures.
NOTE! It is recommended to clean the agitator and the inside of bowl immediately after work is
fi
nished. This will prevent the food
remains from drying up and facilitate product cleaning.
If the bowl and agitators are dismantled from the product, they must be removed for maintenance operations.
The dismantled agitator and bowl can be cleaned under the stream of running water.
If, while working, the drive housing becomes soiled with processed food, stop the work, disconnect the product from power supply
by pulling the plug of the power cable from the power socket, clean the product and then resume work.
Only mild detergents designed for cleaning kitchen utensils may be used for cleaning the product. It is forbidden to use abrasive
cleaning agents e.g. powder or cleaning milk and any cleaning agents that contain caustic agents. Do not use gasoline or alcohol
solvents for cleaning.
Cleaning agent should be dissolved in water according to information supplied with it, then apply it on a soft cloth and clean the
drive housing from the outside.
Remove residues of the cleaning agent with a soft cloth slightly soaked in clean water. Then dry all surfaces with a dry soft cloth.
NOTE! The drive housing is not designed for cleaning with a water jet. Also, do not immerse the drive in water.
None of the product component is suitable for washing in a dishwasher or in a high pressure water jet.
Before using the product again, all components should be thoroughly dried.
After drying, store the bowl in a reversed position. This will prevent impurities from penetrating the inside of the bowl.
Product transport and storage
Before you start to store or transport the product, clean it from food remains.
Product when stored should be kept indoors, protect it from dust, dirt and moisture. It is recommended to store the product in its
original packaging.
TECHNICAL DETAILS
Parameter
Measuring unit
Value
Value
Value
Value
Catalogue number
YG-03020
YG-03021
YG-03022
YG-03023
Rated voltage
[V a.c.]
220-240
220-240
220-240
380-415
Rated frequency
[Hz]
50 / 60
50 / 60
50 / 60
50 / 60
Rated power
[W]
500
1100
1100
2200
Insulation class
I
I
I
I
Max. rotational speed without load
[min
-1
]
110 / 178 / 355
104 / 187 / 365
104 / 187 / 365
104 / 206 / 399
Bowl capacity
[l]
15
20
30
40
Max. bowl load
[kg]
3
5
6
8
Net weight
[kg]
59
85
91
152
Protection class
IPX0
IPX0
IPX0
IPX0
Noise level L
wA
[dB(A)]
<85
<85
<85
<85
Parameter
Measuring unit
Value
Value
Value
Value
Value
Catalogue number
YG-03025
YG-03026
YG-03027
YG-03028
YG-03029
Rated voltage
[V a.c.]
220-240
220-240
220-240
220-240
380-415
Rated frequency
[Hz]
50/60
50/60
50/60
50/60
50/60
Rated power
[W]
550
740
1100
1300
2200
Insulation class
I
I
I
I
I
Max. rotational speed without load
[min
-1
]
110 / 178 / 335
110 / 200 / 420
80 / 160 / 388
80 / 160 / 388
74 / 155 / 388
Bowl capacity
[l]
10
25
35
40
60
Max. bowl load
[kg]
1.5
3
4.5
6
8
Net weight
[kg]
58
82
148
153
150
Protection class
IPX0
IPX0
IPX0
IPX0
IPX0
Noise level L
wA
[dB(A)]
<85
<85
<85
<85
<85
Summary of Contents for YG-03020
Page 17: ...17 RUS...
Page 18: ...18 RUS 10 30 16 60...
Page 19: ...19 RUS IEC 60309 3P E L...
Page 20: ...20 RUS...
