YATO YT-82550, Original Instructions Manual

11

O R I G I N A L   I N S T R U C T I O N S

GB

Personal safety        

Commence work in good physical and psychological conditions. Pay attention to what you do. Do not work if you are 

tired or under e

ff

 ects of medicines or alcohol.

 Even a moment’s inattention during work may lead to serious injuries. 

Always use individual means of protection. Always wear goggles.

 Using individual means of protection, such as dust-masks, 

protective shoes, helmets and hearing protections permits to reduce the risk of serious injuries. 

Avoid accidental activation of the tool. Make sure the switch is in the OFF position, before you connect the tool to the 

mains.

 Holding the tool with a 

fi

 nger on the switch or connecting an electric tool when the switch is in the ON position may lead 

to serious injuries. 

Before you turn an electric tool on remove all the spanners and other tools, which have been used for adjustments.

 A 

spanner left on rotating elements of the tool may lead to serious injuries. 

Keep your balance. Maintain an appropriate position.

 It will permit to control the electric tool in case of unpredicted situations 

during its operation. 

Use protective clothes. Do not wear loose clothes or jewellery. Keep your hair, clothes and gloves away from moving 

elements of the electric tool.

 Loose clothes, jewellery or long hair may get caught on moving elements of the tool. 

Use dust extractors or dust containers, if the tool is equipped with any. Make sure they are properly connected.

 Using of 

dust extractors permits to reduce the risk of serious injuries. 

Operation of the electric tool

Do not overload the electric tool. Use a proper tool for the given purpose.

 A correct selection of the tool for the given work 

will result in a more e

ffi

  cient and safer work. 

Do not use the electric tool if the switch is not functioning properly.

 A tool which may not be controlled by means of a switch 

is dangerous and must be repaired. 

Disconnect the plug from the mains socket before any adjustment, replacement of accessories or storage of the tool.

 It 

will permit to avoid accidental activation of the electric tool. 

Store the tool away from children. Do not allow untrained persons to operate the tool.

 An electric tool may be dangerous 

in hands of an untrained person. 

Make sure the tool is properly maintained. Check the tool in order to detects any un

fi

 tting or loose moving elements. 

Check whether the elements of the tool are not damaged. In case any damaged elements of the tool are detected, they 

must be repaired before the electric tool is operated.

 Many accidents are caused by improper maintenance of tools. 

Cutting tools must be sharp and clean.

 Properly maintained cutting tools are easier to control during work. 

Use electric tools and accessories in accordance with the aforementioned instructions. Use the tool in accordance with 

its purpose, taking into account the kind and conditions of work.

 Should the tool be used for other applications than the ones 

it has been designed for, the risk of a dangerous situation increases.

Repairs 

The tool may be repaired only by authorised service centres, which must use solely original spare parts.

 It will guarantee 

a proper level of safety of operation of the electric tool. 

ADDITIONAL SAFETY INSTRUCTIONS

When using the machine, always observe safety rules attached in user manual as well as other OH&S instructions.

It is forbidden to use spray guns by children and persons untrained in operation of spray guns.

Never point the device towards people or animals.

Spray guns must not be used for 

fl

 ammable materials.

Spray guns should not be cleaned with 

fl

 ammable solvents.

Avoid any hazards caused by sprayed material and check designation on the container or information attached to it by a manufac-

turer on material sprayed, along with requirements regarding the use of personal protection materials.

Do not spray any materials that may cause unknown hazards.

Note! A high pressure stream can cause severe skin damage. Never allow any part of the body to come into contact with the stream.

Protective clothing does not provide su

ffi

  cient protection against injuries in the form of an injection.

If case of an injection of high pressure stream under the skin, contact your physician immediately.  A physician should be informed 

about the type of substance being sprayed.

Do not eat, drink or smoke within working area.

Always wear a respiratory mask that provides protection against inhalation of harmful vapour.

Provide proper ventilation to prevent accumulation of 

fl

 ammable vapour in the air within working space.

Appropriate measures must be taken to prevent hazards resulting from substance being sprayed.  Observe the instructions indi-

cated on the packaging or formulated by the spraying substance manufacturer.

Do not spray any substances that are prohibited in this manual.

Do not spray materials of unknown composition.

Do not use the tool without the nozzle cover installed.

Never use the tool if any safety devices or covers have been damaged.