10
GB
O R I G I N A L I N S T R U C T I O N S
PRODUCT SPECIFICATION
The cordless polisher is a universal, portable tool which does not require an external power source, designed for DIY enthusiasts
to polish and grind surfaces made of di
ff
erent materials with abrasive paper. Its speci
fi
c advantages will be appreciated by DIY
enthusiasts performing various assembly and
fi
nishing works. As the proper use of the power tool is a condition for the correct,
reliable and safe operation of it, please
Read and keep the entire manual before the
fi
rst use of the tool.
The manufacturer shall not be held liable for any damage resulting from failure to observe the safety regulations and recommen-
dations speci
fi
ed in this manual.
ACCESSORIES
The product is supplied complete and does not require assembly. The product comes with: battery, charging station (charger),
additional handle, polishing disc and sponge polishing pad.
TECHNICAL PARAMETERS
Parameter
Units
Value
Catalogue No.
YT-82920
Operating Voltage
[V]
18 DC
Revolutions (idle speed)
[min
-1
]
1500 - 5000
Noise level
- sound pressure
[dB]
88,0 ± 3,0
- power L
wA
[dB]
99,0 ± 3,0
Ingress protection rating
IP20
Protection class
III
Vibration level
[m/s
2
]
15,540 ± 1,5 / 18,859 ± 1,5
Weight
[kg]
1,8
Maximum grinding disc diameter
[mm]
150
Battery type
Li-ion
Battery capacity
[Ah]
3
Charger
Input voltage
[V~]
220 - 240
Mains frequency
[Hz]
50 / 60
Rated power
[W]
60
Output voltage
[V]
21 DC
Input current
[A]
2,4
Charging time
[h]
1,5
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and speci
fi
cations provided with this power tool.
Failure to do so may
result in electric shock,
fi
re or serious injury.
Keep all warnings and instructions for future reference.
The term “power tool” used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean.
Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing
fl
ammable liquids, gases
or vapors.
Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace.
Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools.
An unmodi
fi
ed plug that
fi
ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers.
Grounding the body increases the risk of electric shock.
Do not expose power tools to contact with atmospheric precipitation or moisture.
Water and moisture that gets inside the
power tool increases the risk of electric shock.
Summary of Contents for YT-82920
