15
GB
O R I G I N A L I N S T R U C T I O N S
Avoid contact with earthed surfaces such as pipes, radiators and coolers.
Grounding the body increases the risk of electric shock.
Do not expose machines to contact with atmospheric precipitation or moisture.
Water and moisture that gets inside the
machine increases the risk of electric shock.
Do not overload the power cable. Do not use the power cord to carry, pull or unplug the power plug from the power outlet.
Avoid contact of the power cable with heat, oils, sharp edges and moving parts.
Damage or entanglement of the power cord
increases the risk of electric shock.
In the case of working outside closed rooms, use extension cords intended for work outside closed rooms.
The use of an
extension cord adapted for outdoor use reduces the risk of electric shock.
When using a machine in a humid environment is unavoidable as a protection against supply voltage use a residual
current device (RCD).
The use of RCD reduces the risk of electric shock.
Personal safety
Stay alert, pay attention to what you do and keep common sense while working with the machine. Do not use a machine
when you are tired or under the in
fl
uence of alcohol or medication.
Even a moment of inattention while working can lead to
serious personal injury.
Use personal protective equipment. Always wear eye protection.
The use of personal protective equipment such as dust
masks, anti-slip safety shoes, helmets and hearing protection reduce the risk of serious personal injury.
Prevent accidental operation. Make sure that the electric switch is in the “o
ff
” position before connecting to the power
supply and / or battery, lifting or moving the machine.
Moving the machine with the
fi
nger on the switch or powering the ma-
chine, when the switch is in the “on” position can lead to serious injuries.
Before turning on the machine remove any keys and other tools that were used to adjust it.
The key left on the rotating parts
of the machine can lead to serious injuries.
Do not reach and do not lean too far. Keep the right attitude and balance all the time.
This will allow easier control over the
machine in case of unexpected work situations.
Dress accordingly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts of the
machine.
Loose clothing, jewelry or long hair can be caught by moving parts.
If the devices are
fi
tted for the connection of dust extraction or dust collection, make sure that they are connected and
used properly.
The use of dust extraction reduces the risk of dust hazards.
Do not let the experience acquired from frequent use of the machine resulted in carelessness and ignoring safety rules.
Carefree action can cause serious injuries in a fraction of a second.
Use and care of the machine
Do not overload the machine. Use the machine appropriate for the selected application.
The right machine will provide a
better and safer job if used according to the designed load.
Do not use the machine, if the electric switch does not allow switching on and o
ff
.
Machine, which cannot be controlled by
means of a power switch is dangerous and must be returned for repair.
Disconnect the plug from the power socket and / or remove the battery if it is detachable from the machine before ad-
justing, changing accessories or storing the machine.
Such preventive measures will allow you to avoid accidentally turning
on the power machine.
Keep the tool out of the reach of children, do not let people who do not know how to operate the machine or these in-
structions use a machine.
Machines are dangerous in the hands of untrained users.
Maintain machines and accessories. Check the machine for mismatches or jams of moving parts, damage to parts and
any other conditions that may a
ff
ect the operation of the power machine. Damage must be repaired before using the
machine.
Many accidents are caused by incorrectly maintained machines.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp edges are less prone to jamming and are
easier to control when working.
Use power machines, accessories and inserted tools etc. in accordance with these instructions, taking into account the
type and conditions of work.
The use of tools for work other than designed is likely to result in a dangerous situation.
Handles and gripping surfaces must be dry, clean and free from oil and grease.
Slippery handles and gripping surfaces do
not allow for safe operation and control of the machine in dangerous situations.
Repairs
Repair the machine only in authorized facilities using only original spare parts.
This ensures proper operation safety of the
power tool.
ADDITIONAL SAFETY INSTRUCTIONS
While working with the chainsaw, keep all parts of the body away from the chain. Make sure that the chain is not in
contact with anything before starting the chainsaw.
A moment’s distraction while working with a chainsaw can lead to cloth or
body part entangling in the chainsaw chain.
Always hold the chainsaw with your right hand by the back handle and with your left hand by the front handle.
Holding
Summary of Contents for YT-84870
