YAUFEY PD221DE, User Manual

8.            Swing Button

Used to make swing mode start or stop.

OPERATIONS

7.            Continuously Dehumidify Button

In the standby state, press this button once to enter the Continuously Dehumidify Mode.

Humidity Settings

In the standby state, you can press the "SETTING" button to set the humidity level. 
Pressing the button each time will increase the humidity by 5%RH. The humidity 
range is 30%RH-80%RH. You can press and hold the button to set the humidity 
faster. Leave it alone for a few seconds to exit the humidity setting.

Timer Setting

The timer setting is used to turn on or turn off the machine automatically.

Press this button to set a timer ranging from 1 hour to 24 hours of this machine. Press 
the button to increase the timing by 1 hour. You can press and hold the button to 
select your desired timer faster. If the timer is set to 00, this timing will be invalid.

When the timing function is enabled, the display will show the current humidity and 
the remaining time.

Speed Setting

Press this button to switch the fan speed between the high and low speed.

Swing the Fan

In the standby state, you can press "SWING" button to let the fan blades swing back 
and forth. Press the button again to stop the fan swinging. When the machine is 
turned off, the fan will also stop swinging.

Working Mode

Dehumidify Mode: In this mode, you can set a desired room humidity. When the actual 
room humidity is higher or lower than that you have set, the machine will start working 
automatically. Drying Clothes Mode: In this mode, the air comes out of the compressor 
and fan to dry your clothes. The fan speed cannot be adjusted. Continuously Dehumidify 
Mode: In this mode, the fan speed can be adjusted, while the humidity cannot.