background image

 

 

 

 

 

 

 

 

2

º

º

º

º

º

º

º

º

Keep the child away from hot places, radiators, space heaters and fireplaces to avoid burns. 

Avoid direct, high impact collisions into walls, sidewalks and other objects.  

Ensure that the handle is securely fixed and that it moves smoothly by turning it left and 

right before riding the YBIKE Session.

DO NOT use attachments not included in packaging or attempt to do any modifications 

yourself, as this may compromise the safety of the ride-on.  

Make sure all components are assembled correctly and secured properly before riding. 

Never use near cars, motor vehicles, roadways, near streets or traffic. DO NOT use in traffic. 

Never allow more than one child to ride on YBIKE Session at any time. Not to be used by 

children weighing more than 20kgs due to insufficient strength.

One time assembly only. This product should only be assembled once.  

WARNING: Chocking Hazards—Small parts. Not for children younger than 2 years old. 

Injury may occur if these precautions are not observed. 

NOTE: Any photos of the YBIKE Session or decals in the owner’s manual are Intended to be 

used  as a reference only, and there may be some differences to the unit you purchased.  

WARNING

Summary of Contents for SESSION











Reviews: