ASSEMBLY INSTRUCTIONS
8
To change the wheel setting, turn the
YBIKE Session upside down so that it
rests on its handles & seat, on the
ground.
Then simply loosen the Wheel bolts
(No. 3.1)
on both sides of the fork so
that the Locking Washer
(No. 3.2)
is
free from the locating hole on the fork
on both the back and front wheels.
Reposition the wheels to the desired
setting, and tighten the bolts ensuring
the Locking Washer
(No. 3.2)
is
aligned and fitted in position, as illus-
trated on pg. 6.
5. Adjusting the Wheel Settings
