www.ydlidar.com Copyright 2015-2019 EAI
3
/
12
5V Power Supply
Development Platform
FIG 3 YDLIDAR X2 AUXILIARY POWER SUPP
Driver Installation
To evaluate and develop the X2 under Windows, please install the serial port driver of the
USB adapter board which adopts CP2102 chip to realize serial port (UART) to USB signal
conversion. Its driver can be downloaded from our official website or downloaded from the
official website of Silicon Labs:
http://cn.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
After extracting the driver package, run the CP2102's Windows driver installation file (exe
file under CP210x_VCP_Windows). Please select the 32-bit version (x86) or 64-bit version
(x64) installation program according to the version of the windows operating system.
FIG 4 YDLIDAR X2 DRIVER VERSION SELECTION
Double-click the exe file and follow the prompts to install it
