ML-x17 DATA LOGGER MANUAL
Manufacturers of low power instruments
page 15
ESD Attention:
Although the data logger is designed to withstand certain amounts of electrostatic
discharge, it is advised to avoid discharged risks. Especially when the housing is open and the electronic
parts are exposed. Please do not touch the PCB if you don’t have to. It is strongly recommended to use an
earthed wrist-band when touching the PCB.
The data logger must be handled with care and never exposed to ESD discharges. When installing a sensor
or other wiring, make sure there is no power on both devices. ESD discharges could cause invisible
damage. This endangers long term stability and proper operation.
2.4 Power on for the First time
In the factory the data logger is programmed with the necessary system information. This information is
viewable in the menu. The data logger is ready to use out of the box if the preparations are checked.
•
SIM card is inserted,
•
SD-card is inserted,
•
Internal battery, or mains power is connected
•
Antenna is connected.
Next, connect your sensors, please consult your sensor’s manual for wiring.
2.5 Connect to a PC, tablet or smart phone
OS compatibility: The data logger can be connected by USB2.0 to a Windows PC or Android tablet or
smart phone. ydocTerminal for Windows can be downloaded from
, ydocTerminal for
Android can be downloaded from the Android Playstore.
