ML-x17 DATA LOGGER MANUAL
Manufacturers of low power instruments
page 76
4.22.10
Remote access
If the logger has FW V3.0B1 or newer, remote access to the data logger can be scheduled by
ydocTerminal V3.0. using our secure tunnel server (tunnel.ydoc.biz).
Note:
The data logger should be configured to use NTP time synchronization.
Within ydocTerminal click: File->New->Schedule a remote connection.
Specify the S/N of the data logger you want to access
and when you think it’s a convenient moment to
access the logger.
Obviously
: A tunnel cannot be established before the next scheduled data transfer interval of the data
logger.
A tunnel can only be established if ydocTerminal is running at the scheduled moment. When running,
ydocTerminal will pop-up a terminal window a few minutes before the scheduled moment.
Type of Server
ydocTerminal supports 4 different types of FTP-server (Passive FTP, Active FTP, Passive FTP with
Explicit TLS or Active FTP with Explicit TLS.
Server address
: Specify the same server and directory as used by the data logger (e.g. ydoc.biz/logfiles)
User/Password:
Specify the exact same credentials as used by the data logger as they are a/o used in
the encryption keys. The user should have read, write and delete rights in the specified directory.
Tunnel Server Properties
This is the Server servicing the secure and encrypted channel between data logger and ydocTerminal.
Standard our server is used (tunnel.ydoc.biz)
, don’t worry we can’t eavesdrop your data.
