ML-x17 DATA LOGGER MANUAL
Manufacturers of low power instruments
page 88
4.29.3 Measurement list
This gives an overview of used measurements and its sample rates etc.
By clicking the character between brackets in front of the concerned parameter brings you directly to the
parameter configuration screen (e.g. to change a parameters sample interval).
4.29.4 Output list
This gives an overview of the configured parameters and their outputs in an ordered list.
By clicking the character between brackets in front of the concerned parameter brings you directly to the
parameter configuration screen (e.g. to change a parameters data output mode).
Measurement list
Parameter Sample interval Alarm interval Factor Offset
Decimals
[1] AVGVi 00:00:05 Not used 1 0 2
[2] AVGCi 00:00:05 Not used 1 0 0
[3] OCi 00:00:05 Not used 1 0 2
[0] Exit
>
Output list
Parameter Log interval Alarm interval Log Output
[1] AVGVi 00:00:05 Not used On Modem; Satellite
[2] AVGCi 00:00:05 Not used On Modem; Auxiliary output (OB1)
[3] OCi 00:00:05 Not used On Modem
[0] Exit
>
