ML-x17 DATA LOGGER MANUAL
Manufacturers of low power instruments
page 69
4.20.6 Camera
This is used to connect an YDOC camera only. It shoots a picture and stores it on the SD-card for
transmission to the host. More info on this camera’s is found here:
http://www.ydoc.biz/data logger-
Select a proper picture size, according to your needs, and your camera. Please consider that a high-
resolution picture results in more data payload, more transfer times and power consumption.
So don’t
exaggerate with the picture-size. The pictures can be send to you by: HTTP, E-mail, FTP, TCP or MQTT.
For an estimation of power consumption and payload, please visit:
http://www.ydoc.biz/data logger-
power-consumption.html
Fout! De hyperlinkverwijzing is ongeldig.
Pictures can be taken independent from the normal data logging interval, e.g. once a day (Interval:
24:00:00) at 9h (Shift with 09:00:00). You can also use a digital input to take an instantaneous picture
(See chapter: “Digital inputs – Action trigger”.
4.20.6.1
Daily operating time slot
If yo
u take several pictures per day, but don’t want to take pictures at night or in opposite during the day,
then you can specify a daily operating time slot in which pictures will be taken (e.g. between 06:00 and
18:00 or between 18:00 and 06:00.
For more information on cameras, please visit:
http://www.ydoc.biz/data logger-accessories.html
Camera settings
[0] Exit
[1] Name >> Camera
[-] Port settings >> RS232 8N1; 115200 Baud
[3] Accessory power >> Enabled; Warm up 00:00:05
[4] Independent data log >> On
[5] Sample log interval >> 01:00:00
[6] Interval shift >> Not used
[7] Daily operating time >> 09:00:00 - 15:00:00
[8] Picture size >> Big (1080p)
[9] Picture sending >> FTP
[A] Picture storage >> Delete after send
[B] Picture number >> Picture
[R] Remove
[T] Camera test >> Passed
>
