4.2.
Access terminal
Please enter” IP address” in the IE browser after the computer obtain the IP address .Then input the “user name” and “password" to access the router configuration
page. Please check the nameplate of indoor unit to find the router’s default “IP address ”“user name”and ”password“ .
Log into the device configuration page below browsers are recommended:
● at least IE 7.0
● at least Firefox 3.0
● at least Safari 4.0
● at least Opera 10.0
● at least Chrome 10.0
5.
Router setting
Please make sure that the router is in normal running and is connected with the computer when configure router. A part of the configure parameters have to set under
operators advise, if take the error parameters, the internet would be out of service. Long press “reset” button restore to factory settings.
Menu 1
Menu 2
description
System
status
Home gateway
information status
You can check the router running status info, such as running hours, LTE
network info, SIM info, WAN, LAN info, WLAN info and so on .
Online terminal
status
Check the user’s info who has connected with the terminal, including MAC
address, IP address and so on
Traffic Statistics
Check all the traffic status since the first running time, specific traffic
information is according to the operator’s data.
Version info
Check the router's software and hardware version number.
LTE info
Check LTE details info, including frequency, cell, RSRP, SINR, RSRQ etc.
Device
Setting
WAN Setting
Network selection:
wireless network and PLMN mode optional
User can select 4G/3G/2G networks. 4G is the fastest, 3G medium, 2G slowest. If
in multiple selection can set the priority network, the router could register to
the priority network once it is the fastest. Default setting is in multiple
selections, 4G preferred.
PLMN is the default setting. User can activated manual option if necessary.
Manual option needs searching the available PLMN in advance.
IPV4 / IPV6:
Set router IP stack support model. The default setting is IPV4 /
IPV6 dual stack.
APN:
Set the access name when you dial. The setting needs follow operator’s
requirement, any change may lead to being unable to access to the internet .
Not recommend changing it.
PIN code:
Set USIM card PIN1 and PUK. If the USIM card enable PINI code or
PUK code, then you need to fill in the appropriate PINI code .Otherwise, the
router will not dial .
MTU:
Set the MTU parameters of the router network port. Do not recommend
to change, otherwise it will cause abnormal network. It needs professional
selection
DNS setting
:set the DNS server address .
WLAN Setting
WLAN setting:
Turn on/off function of WIFI, view / change WIFI SSID, password,
encryption, channel etc. User can modify router WIFI SSID, password and
encryption methods. It takes the current channel in use. Channel could be
modified.
DHCP
DHCP:
Set the router’s DHCP info and IP info, once turn off the DHCP, the user
has to set IP manually, and it can not obtain the IP automatically.
Keep address
: Reserved address is only effective when you enable DHCP server,
click [Add] button to formulate MAC address binding fixed IP address, this IP
address will only be assigned to the MAC address which the computer belongs.
IPV6 set
Setting IPV6 address allocation, PNAT function.
L2TP
Set the L2TP dialing mode, if you do not dial, set to None
LTE
frequency
locking
Check currently supported frequency bands and set the LTE locking frequency.
SMS
function
New message
You can edit new message and send it
In box
Check received message
Draft
Check edited but not send message
Sent
Check the message sent message
Firewall
Filtering Rules
Ports filtering:
Set the ports which need to be filtered
IP address filtering:
Set the IP address which need to be filtered.
MAC address filtering
：Set the MAC address which needs to be filtered.
URL Filtering:
Set the website which needs to be filtered.
MAC binding:
Set binding IP and MAC address.
Default rules:
Set other filtering rules which has not included here.
Speed limit
Setting speed limit rule, only IP address limit currently
System
manage
ment
System setting
Change Password:
Change password logging into the router configuration
page.
Change user name:
change the log on user name.
Reboot setting:
reboot setting.
System Time:
Set the router system time.
System log
Check system work log
Reboot
Support reset router
System update
When the system update, you must download the updated file to your
computer .The device supports tar.gz or tar.lzma format update file, you need to
unzip the file .After the computer has obtained the upgrade files, update files
need to upload to the device first, meanwhile also need to upload MD5
verification code during the upgrade. After uploading, you can click to upgrade
system. The system upgrade will not remove your previous profile
Module update
Update the LTE module software
Configurable
update
Update router system setting
Restart device
User can restart router
Online help
View self-help files for router
