Advanced Phone Features
89
2.
Select the desired codec from the pull-down list of Multicast Codec.
The default codec is G722.
3.
Click Confirm to accept the change.
Note
To send RTP stream:
1.
Press the multicast paging key when the phone is idle.
The phone sends RTP to a preconfigured multicast address (IP: Port). Any phone in
the local network then listens to the RTP on the preconfigured multicast address (IP:
Port). For both sending and receiving of the multicast RTP, there is no SIP signaling
involved.
LED Indicators illuminate solid green.
The following figure shows a multicast RTP session on the phone:
If G722 codec is used for multicast paging, the LCD screen will display the icon to
indicate that it is providing high definition voice.
Default codec for multicast paging is configurable via web user interface only.
