Configuring Advanced Features
445
To configure allow mute via web user interface:
1.
Click on
Features
->
Door Phone
.
2.
Select the desired door phone from the pull-down list of
Door Phone List
.
3.
Enter the display name of the door phone in the
Display Name
field.
4.
Enter the number of the door phone in the
Phone Number
field.
If you leave it blank or enter the wrong number, the IP phone will take the incoming door
phone call as a normal call.
5.
Enter the unlock PIN in the
Unlock PIN
field.
6.
Select the desired value from the pull-down list of
Full Screen
.
7.
Select the desired value from the pull-down list of
Send Audio
.
8.
Select the desired value from the pull-down list of
Send Video
.
9.
Click
Confirm
to accept the change.
Mobile Account
Yealink IP phones support connecting a Bluetooth-enabled mobile phone. After connection, the
IP phone will automatically find an available DSS key and assign the DSS key for Mobile Account.
The Mobile Account key’s default label is “My Mobile”. If there is no available DSS key, you may
assign it manually.
The Mobile Account key can be used in the following scenarios:
Accept the incoming mobile call if there is an incoming call to your mobile phone.
Make a call through a mobile phone. But the IP phone acts as a hands free device for your
mobile phone.
None
Summary of Contents for CP969
