Configuring Advanced Features
157
-
Tap the
Colors
radio box.
-
Tap the
Photo Frame
radio box.
Tap next to the radio box to select the desired Gallery album(s).
Tap the desired checkbox or
SELECT ALL
on the top-right of the touch screen.
Tap to return to the Screen Saver setting screen.
-
Tap the
Photo Table
radio box.
Tap next to the radio box to select the desired Gallery album(s).
Tap the desired checkbox or
SELECT ALL
on the top-right of the touch screen.
Tap to return to the Screen Saver setting screen.
6.
Tap to accept the change or to cancel.
Power Saving
The power-saving feature is used to turn off the backlight and screen to conserve energy. The IP
phone enters power-saving mode after it has been idle for a certain period of time. And the IP
phone will exit power-saving mode if a phone event occurs - for example, if the phone has an
incoming call or message, or you press a key on the phone or tap the touch screen.
For SIP-T58V/T58A/T56A IP phones, if you connect a color-screen expansion module EXP50 to
the IP phone, the IP phone and EXP50 will enter or exit power-saving mode synchronously.
) is enabled on your phone, power-saving mode will still
occur. For example, if a screen saver is configured to display after the phone is idle for 5 minutes,
and power-saving mode is configured to turn off the backlight and screen after the phone is idle
for 15 minutes, the backlight and screen will be turned off after the screen saver displays for 10
minutes.
You can configure the following power-saving settings:
Office Hour
: Configures the starting time and ending time of the day’s office hour for each
day of the week. You can configure power saving around your work schedule.
Idle TimeOut (minutes)
: Configures the period of time before the IP phone enters
power-saving mode. You can configure different idle timeouts for office hours and off
hours (evenings and weekends). You can also specify a separate timeout period that
applies after you use the phone.
By default, the Office Hours Idle TimeOut is much longer than the Off Hours Idle TimeOut. If you
use the IP phone, the idle timeout that applies (User Input Extension Idle TimeOut or Office
Hours/Off Hours Idle TimeOut) is the timeout with the highest value. If the phone has an
incoming call or message, the User Input Extension Idle TimeOut will be ignored.
Note
For SIP-T58V/T58A/T56A IP phones, if you disable the power saving feature, the IP phone will
automatically enter power-saving mode to protect the screen when the phone is inactive for 72
hours. Image persistence may be caused on LCD if power saving is disabled.
Summary of Contents for CP969
