Yealink CP969 Administrator'S Manual Download

Page: 828 / 868

Administrator’s Guide for SIP-T5 Series Smart Media Phones

806

6xx Response

Supported

Notes

603 Decline

Yes

604 Does Not Exist Anywhere

606 Not Acceptable

SIP Session Description Protocol (SDP) Usage

SDP Headers

Supported

v—Session Description Protocol Version

Yes

o—Owner/Creator, Session Id

Yes

a—Media Attribute

Yes

c—Connection Information

Yes

b—Bandwidth Information

Yes

m—Media Description, name and
address

Yes

s—Session Name

Yes

t—Time Description, active time

Yes

Appendix I: SIP Call Flows

SIP uses six request methods:

INVITE—Indicates a user is being invited to participate in a call session.

ACK—Confirms that the client has received a final response to an INVITE request.

BYE—Terminates a call and can be sent by either the caller or the callee.

CANCEL—Cancels any pending searches but does not terminate a call that has already been
accepted.

OPTIONS—Queries the capabilities of servers.

The following types of responses are used by SIP and generated by the IP phone or the SIP
server:

SIP 1xx—Provisional Responses

SIP 2xx—Successful Responses

SIP 3xx—Redirection Responses

SIP 4xx—Request Failure Responses

Summary of Contents for CP969





































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CP969

Reviews:

Related manuals for CP969

Brands by name

Popular brands

Yealink CP969, Administrator'S Manual

Search results

Summary of Contents for CP969

Reviews:

Related manuals for CP969

Brands by name

Popular brands