12
Yealink Phones User Guide
© 2003 - 2012 Bicom Systems
4.2.3.1
DHCP
1. Configure DHCP
Make sure your DHCP router is configured to use
option 66
to automatically
instruct phones with the URL for auto provisioning. For more information refer to
your router documentation or contact your network administrator.
2. Phone first boot or user initiated reboot
Auto provisioning process will start during phone first boot or after reboot process has
been initiated by user. DHCP server will instruct the phone where from to pickup
appropriate configuration file. If everything is done as above described, you should
have successfully registered your phone to PBXware. Dial
*123
to verify
registration.
4.2.3.2
TFTP or HTTP & HTTPS
1. Login to phone web administration interface
If there is no DHCP in your network, you can still auto provision your Yealink phone.
Please refer to your Yealink phone model User Guide for instruction about setting static
IP address. After you configure your Yealink phone to use a static IP address, continue
with the following steps.
Open a new browser window and enter your phone IP address in order to access
the phone web administration interface login screen. Example:
http://192.168.1.22
.
Login to the phone web administration interface with your username and password.
Please note, factory default login details are username: admin and password:
admin.
Click on
Upgrade
tab.
Click on
Advanced
tab.
You can use
TFTP
or
HTTP & HTTPS
protocols in order to Auto Provision your
Yealink phone.
Choose which protocol you want to use:
-
TFTP
-
HTTP & HTTPS
