Yealink IP Phones Auto Provisioning Guide
36
The following figure shows the message flow:
In addition to the updating modes introduced above, users can trigger IP phones to
perform auto provisioning by dialing an activation code. To use this method, the
activation code and the provisioning server address need to be pre-configured on the
IP phones. This method is normally used for IP phones distributed by retail sales. It has
the advantage that the IP phones do not need to be handled (e.g., registering account)
before sending them to end-users.
The following lists the processes for triggering auto provisioning via activation code:
1.
Create multiple directories (e.g., T23G_1 and T23G_2) on the provisioning server.
2.
Store a common CFG file and multiple <MAC>.cfg files to each directory on the
provisioning server.
3.
Configure a user name and password for each directory.
The user name and password provides a means of conveniently partitioning the
