Yealink IP Phones Auto provisioning Guide
80
Parameter
Permitted
Values
Descriptions
Web Setting Path
auto_provision
.aes_key_in_fil
e =
0 or 1
It enables or disables the phone to
decrypt configuration files using the
encrypted AES keys.
0-Disabled
1-Enabled
If it is set to 1, the phone will download
<y0000000000xx_Security>.enc and
<MAC_Security>.enc files during auto
provisioning, and then decrypts these
files into the plaintext keys (e.g., key2,
key3) respectively using the phone
built-in key (e.g., key1). The IP phone
then decrypts the encrypted
configuration files using corresponding
key (e.g., key2, key3).
The default value is 0.
autoprovision.
X.name =
(X ranges
from 1 to 50)
String within
64
characters
It configures the name of the code for
triggering auto provisioning.
The default value is blank.
It takes effect after a reboot.
autoprovision.
X.code =
(X ranges
from 1 to 50)
String
It configures the code for triggering
auto provisioning.
Valid characters are digits, # and *.
Example:
autoprovision.1.code = *99
The default value is blank.
It takes effect after a reboot.
autoprovision.
X.url =
(X ranges
from 1 to 50)
URL within
511
characters
It configures the access URL of auto
provisioning server.
The default value is blank.
It takes effect after a reboot.
autoprovision.
X.user =
(X ranges
from 1 to 50)
String within
64
characters
It configures the user name for
authentication during auto
provisioning.
The default value is blank.
It takes effect after a reboot.
Summary of Contents for SIP-T2 Series
