Yealink SIP-T21 E2 Quick Installation Manual Download

Page: 2 / 4

The hookswitch tab has a lip which allows the handset to stay on-hook when the IP

phone is mounted vertically.

Adjust the hookswitch tab as shown below:

T21P E2

180。

Adjusting the Stand

To adjust the stand

1. Detach the reversible bracket from the stand.
2. Rotate the reversible bracket 180 degrees.
3. Attach the reversible bracket to the base.

Adjust the stand as shown below:

Adjusting the Stand

SIP-T21(P) E2 and SIP-T23G IP phones are mounted to the wall via the stand which
consists of the reversible bracket and the base, as shown below:

The reversible bracket

The base

Summary of Contents for SIP-T21 E2

Page 1: ...n which is included with your IP phone Screws wall anchors and applicable tools are also required for wall mount installation These are not included with your IP phones You need to purchase them separ...

Page 2: ...To adjust the stand 1 Detach the reversible bracket from the stand 2 Rotate the reversible bracket 180 degrees 3 Attach the reversible bracket to the base Adjust the stand as shown below Adjusting the...

Page 3: ...one Yealink provides two kinds of the wall mount drilling templates which locate and mark the position for mounting the screws not provided on the wall as shown below Mounting the Wall Mount Bracket 2...

Page 4: ...and USB phones With a worldwide market in more than 140 countries the company has also established a first class international service network Our priorities are quality functionality ease of use cus...