Yealink SIP-T2XP Administrator'S Manual Download | Manualshive

Page: 2 / 589

background image

Copyright © 2014 YEALINK NETWORK TECHNOLOGY
Copyright © 2014 Yealink Network Technology CO., LTD. All rights reserved. No parts of this
publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, photocopying, recording, or otherwise, for any purpose, without the express written
permission of Yealink Network Technology CO., LTD. Under the law, reproducing includes
translating into another language or format.

When this publication is made available on media, Yealink Network Technology CO., LTD. gives
its consent to downloading and printing copies of the content provided in this file only for private
use but not for redistribution. No parts of this publication may be subject to alteration,
modification or commercial use. Yealink Network Technology CO., LTD. will not be liable for any
damages arising from use of an illegally modified or altered publication.

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE
SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND
RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS.

YEALINK NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink Network Technology
CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance, or use of this guide.

Hereby, Yealink Network Technology CO

.,

LTD. declares that this phone is in conformity

with the essential requirements and other relevant provisions of the CE, FCC.

This device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.

This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired

operation.

«
1
2
3
4
...
»

Summary of Contents for SIP-T2XP














































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SIP-T2XP

Brand: Samsung Pages: 35

Brand: Samsung Pages: 7

Brand: Samsung Pages: 40

Brand: Samsung Pages: 16

Brand: Samsung Pages: 17

Admire SCH-R720

Brand: Samsung Pages: 136

A840 - SPH Cell Phone

Brand: Samsung Pages: 146

A727 - SGH Cell Phone 28 MB

Brand: Samsung Pages: 185

A660 - SPH Cell Phone

Brand: Samsung Pages: 9

A517 - SGH Cell Phone

Brand: Samsung Pages: 163

A436 - SGH Cell Phone 3 MB

Brand: Samsung Pages: 126

A437 - SGH Cell Phone

Brand: Samsung Pages: 120

A310 - SCH Cell Phone

Brand: Samsung Pages: 6

A117 - SGH Cell Phone

Brand: Samsung Pages: 92

A127 - SGH Cell Phone

Brand: Samsung Pages: 123

Byline SCH-R310 Serie

Brand: Samsung Pages: 120

Brand: Aastra Pages: 19

Clearspan 6757i

Brand: Aastra Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands