Yealink SIP-T2XP Administrator'S Manual Download

Page: 370 / 589

Administrator’s Guide for SIP-T2xP IP Phones

352

Variable Value

Phone Action

ENTER

Press the Enter soft key (Except for SIP-T20P).

SPEAKER

Press the Speakerphone key.

F_TRANSFER

Transfers a call to another party.

VOLUME_UP

Increase the volume.

VOLUME_DOWN

Decrease the volume.

MUTE

Mute a call.

F_HOLD

Place an active call on hold.

Cancel actions or reject incoming calls (For
SIP-T22P/T20P, also mute or un-mute calls).

0-9/*/POUND

Press the keypad (0-9, * or #).

L1-LX

Press the line keys (for SIP-T28P, X=6, for
SIP-T26/22P, X=3, for SIP-T20P, X=2).

D1-D10

Press the memory keys (Only for SIP-T28/T26P).

F_CONFERENCE

Press the CONF key (Except for SIP-T22P) or the
Conference soft key (Except for SIP-T20P).

F1-F4

Press the soft keys (Except for SIP-T20P).

MSG

Press the MESSAGE key.

HEADSET

Press the HEADSET key.

Press the RD key.

UP/DOWN/LEFT/RIGHT

Press the navigation keys.

Reboot

Reboot the phone.

AutoP

Perform auto provisioning.

DNDOn

Activate the DND mode.

DNDOff

Deactivate the DND mode.

number=xxx&outgoing_uri=y

Place a call to xxx from SIP URI y.

OFFHOOK

Pick up the handset.

ONHOOK

Hang up the handset.

ANSWER

Answer a call.

Reset

Reset a phone.

Summary of Contents for SIP-T2XP














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIP-T2XP

Reviews:

Related manuals for SIP-T2XP

Brands by name

Popular brands

Yealink SIP-T2XP, Administrator'S Manual

Search results

Summary of Contents for SIP-T2XP

Reviews:

Related manuals for SIP-T2XP

Brands by name

Popular brands