Yealink SIP-T2XP Administrator'S Manual Download

Page: 372 / 589

Administrator’s Guide for SIP-T2xP IP Phones

354

Local

Web User Interface

Specify the trusted IP address(es)
for sending the action URI to the
IP phone.

Navigate to:

http://<phoneIPAddress>/servlet?
p=features-remotecontrl&q=load

Details of the Configuration Parameter:

Parameter

Permitted Values

Default

features.action_uri_limit_ip

IP address or any

Blank

Description:

Configures the address(es) from which Action URI will be accepted.

For discontinuous IP addresses, multiple IP addresses are separated by commas.

For continuous IP addresses, the format likes *.*.*.* and the “*” stands for the values
0~255.

For example: 10.10.*.* stands for the IP addresses that range from 10.10.0.0 to
10.10.255.255.

If left blank, the IP phone will reject any HTTP GET request.

If it is set to “any”, the IP phone will accept and handle HTTP GET requests from any
IP address.

Example:

features.action_uri_limit_ip = any

Web User Interface:

Features->Remote Control->Action URI allow IP List

Phone User Interface:

None

To configure the trusted IP address(es) for action URI via web user interface:

Click on Features->Remote Control.

Enter the IP address or any in the Action URI allow IP List field.

Summary of Contents for SIP-T2XP














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIP-T2XP

Reviews:

Related manuals for SIP-T2XP

Brands by name

Popular brands

Yealink SIP-T2XP, Administrator'S Manual

Search results

Summary of Contents for SIP-T2XP

Reviews:

Related manuals for SIP-T2XP

Brands by name

Popular brands