Yealink SIP-T2XP Administrator'S Manual Download

Page: 405 / 589

Configuring Advanced Features

387

The default option is 132.

Click Confirm to accept the change.

A dialog box pops up to prompt that settings will take effect after a reboot.

Click OK to reboot the phone.

To configure VLAN for Internet port (or PC port) via phone user interface:

Press Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->WAN Port (or PC Port).

Press or , or the Switch soft key to select the desired value from the VLAN
Status field.

Enter the VLAN ID (1-4094) in the VID field.

Enter the priority value (0-7) in the Priority field.

Press the Save soft key to accept the change

The IP phone reboots automatically to make settings effective after a period of
time.

To configure DHCP VLAN discovery via phone user interface:

Press Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->DHCP VLAN.

Press or , or the Switch soft key to select the desired value from the DHCP
VLAN field.

Enter the desired option in the Option field.

Press the Save soft key to accept the change.

The IP phone reboots automatically to make settings effective after a period of time.

Summary of Contents for SIP-T2XP














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIP-T2XP

Reviews:

Related manuals for SIP-T2XP

Brands by name

Popular brands

Yealink SIP-T2XP, Administrator'S Manual

Search results

Summary of Contents for SIP-T2XP

Reviews:

Related manuals for SIP-T2XP

Brands by name

Popular brands