Administrator’s Guide for SIP-T2xP IP Phones
448
Parameters
Permitted Values
Default
When Y=4, the default value is 4;
When Y=5, the default value is 18;
When Y=6, the default value is 9;
When Y=7, the default value is 106;
When Y=8, the default value is 103;
When Y=9, the default value is 104;
When Y=10, the default value is 102;
When Y=11, the default value is 105.
Example:
account.1.codec.1.rtpmap = 0
Web User Interface:
None
Phone User Interface:
None
account.X.ptime
0 (Disabled), 10, 20,
30, 40, 50 or 60
20
Description:
Configures the ptime (in milliseconds) for the codec for account X.
X ranges from 1 to 6 (for SIP-T28P).
X ranges from 1 to 3 (for SIP-T26P/T22P).
X ranges from 1 to 2 (for SIP-T20P).
Example:
account.1.ptime = 20
Web User Interface:
Account->Advanced->PTime (ms)
Phone User Interface:
None
To configure the codecs to use and adjust the priority of the enabled codecs on a
per-line basis via web user interface:
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Codec.
4.
Select the desired codec from the Disable Codecs column and then click .
The selected codec appears in the Enable Codecs column.
Summary of Contents for SIP-T2XP
