Administrator’s Guide for SIP-T2xP IP Phones
456
Parameters
Permitted Values
Default
None
voice.jib.normal
Integer from 0 to 400
120
Description:
Configures the normal delay time (in milliseconds) of jitter buffer.
Note: It works only if the parameter “voice.jib.adaptive” is set to 0 (Fixed).
Web User Interface:
Settings->Voice->JITTER BUFFER->Normal
Phone User Interface:
None
To configure Jitter Buffer via web user interface:
1.
Click on Settings->Voice.
2.
Mark the desired radio box in the Type field.
3.
Enter the minimum delay time for adaptive jitter buffer in the Min Delay field.
The valid value ranges from 0 to 300.
4.
Enter the maximum delay time for adaptive jitter buffer in the Max Delay field.
The valid value ranges from 0 to 300.
5.
Enter the fixed delay time for fixed jitter buffer in the Normal field.
The valid value ranges from 0 to 300.
6.
Click Confirm to accept the change.
Summary of Contents for SIP-T2XP
