Administrator’s Guide for SIP-T2xP IP Phones
478
Directory Template
Super Search Template
Local Contact File
Remote XML
Phone
Book
The replace rule template helps with the creation of multiple replace rules. After setup,
place the replace rule template to the provisioning server and specify the access URL in
the configuration files.
When editing a replace rule template, learn the following:
<DialRule> indicates the start of a template and </DialRule> indicates the end of
a template.
Create replace rules between <DialRule> and </DialRule>.
When specifying the desired line(s) to apply the replace rule, the valid values are 0
and line ID. The digit 0 stands for all lines. Multiple line IDs are separated by
commas.
At most 100 replace rules can be added to the IP phone.
The expression syntax in the replace rule template is the same as that introduced
in the section
Dial Plan
on page
116
.
Procedure
Use the following procedures to customize a replace rule template.
To customize a replace rule template:
1.
Open the template file using an ASCII editor.
2.
Add the following string to the template, each starting on a separate line:
<Data Prefix="" Replace="" LineID=""/>
Where:
Prefix="" specifies the numbers to be replaced.
Replace="" specifies the alternate string instead of what the user enters.
LineID="" specifies the desired line(s) for this rule. When you leave it blank or enter
0, this replace rule will apply to all lines.
3.
Specify the values within double quotes.
4.
Place this file to the provisioning server.
The following shows an example of a replace rule template:
<DialRule>
Summary of Contents for SIP-T2XP
