Yealink SIP-T2XP Administrator'S Manual Download

Page: 566 / 589

Administrator’s Guide for SIP-T2xP IP Phones

548

Step

Action

Description

INVITE—User A to Proxy
Server

User A sends an INVITE message to the
proxy server. The INVITE request is an
invitation to User B to participate in a
call session.

In the INVITE request:



The IP address of User B is inserted
in the Request-URI field.



User A is identified as the call
session initiator in the From field.



A unique numeric identifier is
assigned to the call and is inserted
in the Call-ID field.



The transaction number within a
single call leg is identified in the
CSeq field.



The media capability User A is
ready to receive is specified.



The port on which User B is
prepared to receive the RTP data is
specified.

INVITE—Proxy Server to User
B

The proxy server maps the SIP URI in the
To field to User B. The proxy server
sends the INVITE message to User B.

180 Ringing—User B to Proxy
server

User B sends a SIP 180 Ringing response
to the proxy server. The 180 Ringing
response indicates that the user is being
alerted.

180 Ringing—Proxy Server to
User A

The proxy server forwards the 180
Ringing response to User A. User A
hears the ring-back tone indicating that
User B is being alerted.

200 OK—User B to Proxy
Server

User B sends a SIP 200 OK response to
the proxy server. The 200 OK response
notifies User A that the connection has
been made.

200 OK—Proxy Server to User
A

The proxy server forwards the 200 OK
message to User A. The 200 OK
response notifies User A that the

Summary of Contents for SIP-T2XP














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SIP-T2XP

Reviews:

Related manuals for SIP-T2XP

Brands by name

Popular brands

Yealink SIP-T2XP, Administrator'S Manual

Search results

Summary of Contents for SIP-T2XP

Reviews:

Related manuals for SIP-T2XP

Brands by name

Popular brands