4. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you which one
to use.
Welcome
Initializing...please wait
After the IP phone is connected to network and supplied with
power, it automatically begins the initialization process. After
startup, the phone is ready for use. You can configure the
phone via web user interface or phone user interface
.
Note:
If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch
is PoE-compliant.
The IP phone should be used with Yealink original power adapter (5V/1.2A) only. The use of the
third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone,
we recommend that you use the Ethernet cable provided by Yealink.
Startup
2
A
AC Power Option
Power Adapter
(DC 5V)
PC Connection
(Optional)
PC
IEEE 802.3af compliant
PoE Hub/Switch
B
PoE ( Power over
Ethernet ) Option
PC Connection
(Optional)
PC
3.
Connect the USB flash drive, as shown below:
Note:
The USB ports can also be used to connect other USB devices, such as EXP43, USB headset and so on.
Yealink recommends that you connect Bluetooth USB dongle or Wi-Fi USB dongle to the upper USB port,
and connect EXP43 to the lower USB port.
PC
Internet
PC
Internet
a. Upper USB Port
b. Lower USB Port
