Customizing Your Phone
43
The IP phone will automatically set the built-in picture as the screen saver.
-
If you select
Custom
.
The IP phone will automatically set the custom pictures you upload as the screen saver,
and display these pictures alternately.
5.
Press the
Save
soft key to accept the change or the
Back
soft key to cancel.
Screen saver is configurable via web user interface at the path
Settings
->
Preference
.
Power Saving
The power saving feature is used to turn off the backlight and screen to conserve energy. The IP
phone enters power-saving mode after it has been idle for a certain period of time.
The IP phone will exit power-saving mode if one of the following phone events occurs:
Press any key.
Pick up/hang up the handset.
There is an incoming call.
A new prompt (e.g., missed call, new voice mail or forwarded call).
The status of BLF key changes.
If the screen saver is enabled on your phone, power-saving mode will still occur.
You can configure the following power-saving settings:
Office Hour
Idle Timeout (minutes)
The office hour and idle timeout (minutes) settings work only if the power saving feature is
enabled.
Note
Power saving is configurable via web user interface only.
Summary of Contents for SIP-T46S
Page 1: ...aji...
Page 26: ...User Guide for the SIP T46S IP Phone 16...
Page 230: ...User Guide for the SIP T46S IP Phone 220...
Page 235: ...Appendix 225 Appendix B Menu Structure...
