Yealink SIP-T4X Administration Manual Download

Page: 423 / 466

Administrator’s Guide for SIP-T4X IP Phones

408

The call flow scenario is as follows:

User A calls User B.

User B is busy on the IP phone and unable or unwilling to take another call.

The call cannot be set up successfully.

User A

Proxy Server

User B

F1. INVITE B

F2. INVITE B

F3. 100 Trying

F4. 100 Trying

F5. 486 Busy Here

F6. 486 Busy Here

F7. ACK

F8. ACK

Step

Action

Description

INVITE—User A to Proxy
Server

User A sends the INVITE message to a
proxy server. The INVITE request is an
invitation to User B to participate in a
call session.

In the INVITE request:



The IP address of User B is inserted
in the Request-URI field.



User A is identified as the call
session initiator in the From field.



A unique numeric identifier is
assigned to the call and is inserted
in the Call-ID field.



The transaction number within a
single call leg is identified in the
CSeq field.



The media capability User A is
ready to receive is specified.



The port on which User B is
prepared to receive the RTP data is

Summary of Contents for SIP-T4X



















































































































































































































































































































































































































































































Search results

Summary of Contents for SIP-T4X

Reviews:

Related manuals for SIP-T4X

Brands by name

Popular brands

Yealink SIP-T4X, Administration Manual

Search results

Summary of Contents for SIP-T4X

Reviews:

Related manuals for SIP-T4X

Brands by name

Popular brands