Yealink SIP-T4X IP Phones Auto Provisioning Guide
20
####################################################
## Upload replace rule file ##
####################################################
dialplan_replace_rule.url =
For example, enter “tftp://192.168.1.100/DialPlan.xml” in the “dialplan_replace_rule.url =”
field. During the auto provisioning process, the phone connects to the provisioning
server “192.168.1.100”, and downloads the replace rule file “DialPlan.xml”.
You can create multiple dial-now rules using the supplied dial-now template file. After
customizing the dial-now rules, place the dial-now file to the provisioning server and
specify the access URL in the configuration files.
When editing a dial-now file, learn the following:
<dialnow> indicates the start of the template file and </dialnow> indicates the
end of the template file.
Create dial-now rules between <dialnow> and </dialnow>.
When specifying the desired line(s) for the dial-now rule, valid values are 0 and
line ID. The digit 0 stands for all lines. Multiple line IDs are separated by commas.
At most 100 dial-now rules can be added to the IP phone.
For the basic expression syntax of the dial-now rule,
refer to
Yealink phone-specific
user guide.
To customize a dial-now file:
1.
Open the template file using an ASCII editor.
2.
For each dial-now rule you wish to add, add the following string to the file. Each
starts on a separate line:
<Data DialNowRule=”” LineID=""/>
Where:
DialNowRule=””/ rule=”” specifies the dial-now rule.
LineID=””/ lines=”” specifies the desired line(s) for this rule. When you leave it
blank or enter 0, this dial-now rule will apply to all lines.
3.
Specify the values within double quotes.
4.
Save the change.
The following shows an example of a dial-now file:
<dialnow>
<Data DialNowRule="1234" LineID="1"/>
<Data DialNowRule="52[0-6]" LineID="1"/>
Summary of Contents for SIP-T4X
