Yealink SIP-T4X IP Phones Auto Provisioning Guide
64
3-PEAP-MSCHAPv2
4-EAP-TTLS/EAP-MSCHAPv2
The default value is 0.
It takes effect after reboot.
network.802_1
x.identity =
String
It configures the user name for 802.1x
authentication.
The default value is blank.
It takes effect after reboot.
Network->
Advanced->802.1x
->Identity
network.802_1
x.md5_passw
ord =
String
It configures the password for 802.1x
authentication.
The default value is blank.
It takes effect after reboot.
Network->
Advanced->802.1x
->MD5 Password
network.802_1
x.root_cert_url
=
URL
It configures the access URL of the root
certificates when the 802.1x mode is
configured as EAP-TLS,
PEAP-MSCHAPV2 or
EAP-TTLS/EAP-MSCHAPV2.
Network->
Advanced->802.1x
->CA Certificates
network.802_1
x.client_cert_u
rl =
URL
It configures the access URL of the
client certificates when the 802.1x
mode is configured as EAP-TLS.
Network->
Advanced->802.1x
->Device
Certificates
network.vpn_
enable =
0 or 1
It enables or disables VPN feature.
0-Disabled
1-Enabled
The default value is 0.
It takes effect after reboot.
Network->
Advanced->VPN->
Active
network.lldp.e
nable =
0 or 1
It enables or disables LLDP feature.
0-Disabled
1-Enabled
The default value is 1.
It takes effect after reboot.
Network->
Advanced->LLDP->
Active
network.lldp.p
acket_interval
=
Integer
from 1 to
3600
It configures the interval (in seconds)
for the phone to broadcast the LLDP
request.
The default value is 60.
It takes effect after reboot.
Network->
Advanced->LLDP->
Packet Interval
(1~3600s)
network.snmp
0 or 1
It enables or disables SNMP feature.
Network->
Advanced->SNMP
Summary of Contents for SIP-T4X
