Yealink SIP-T4X IP Phones Auto Provisioning Guide
72
transfer.semi_
attend_tran_e
nable =
0 or 1
It enables or disables the transferee
party’s phone to prompt a missed call
on the LCD screen before displaying
the caller ID.
0-Disabled
1-Enabled
The default value is 1.
Features->Transfer
->Semi-Attend
Transfer
transfer.blind_
tran_on_hook_
enable =
0 or 1
It enables or disables the phone to
complete the blind transfer through
on-hook.
0-Disabled
1-Enabled
The default value is 1.
Features->Transfer
->Blind Transfer On
Hook
transfer.on_ho
ok_trans_ena
ble =
0 or 1
It enables or disables the phone to
complete the attended transfer
through on-hook.
0-Disabled
1-Enabled
The default value is 1.
Features->Transfer
->Semi Attend
Transfer On Hook
transfer.dsske
y_deal_type =
0,1 or 2
It defines the line key behavior during
an active call when user presses the
line key and the line key is configured
as a transfer or BLF key.
0-New Call
1-Attended Transfer
2-Blind Transfer
The default value is 2.
Features->Transfer
->Transfer Mode
Via Dsskey
transfer.tran_o
thers_after_co
nf_enable =
0 or 1
It enables or disables the phone to
transfer call to the two parties after a
local conference call hangup.
0-Disabled
1-Enabled
The default value is 0.
Features->Transfer
->Transfer on
Conference Hang
up
voice.vad =
0 or 1
It enables or disables the voice activity
detection.
0-Disbaled
1-Enabled
The default value is 0.
Settings->Voice->
Echo Cancellation
->VAD
Summary of Contents for SIP-T4X
