background image

5.12 Dial Plan 

 

Drop Prefix 

-No: when dialed number matches with the 

rule, the number will be dialed without any 

change except adding the prefix. You can 

input 7 numbers. 

-Yes: when dialed number matches with the 

rule, the specified prefix that matched the 

rule will be removed before adding the 

prefix in the left box. You can input 31 

numbers. 

Replace rule

Set dialing rule.   

Left box is for the prefix to be added. 

Right box is for the rule to be matched so 

that action will be taken by adding the 

prefix on the left. 

 

Dial Now 

When the number matches with the rule of 

“Dial Now”, numbers will be sent out 

automatically. The first number shall not be 

set as 0, because 0 means not to use the rule 

“Dial Now”. Therefore, when the “Dial 

Now” is set as 0xxxx, the number will not 

be dialed out as the rule, because the first 

number is 0. 

 

Auto Dial 

Time 

The default setting is 5 (seconds). While 

dialing a number, once the user stops 

pressing the keypad for 5 seconds, the 

device will commence the dialing process. 

You can set this option within the range of 

3-9 seconds. 

10 

11

Summary of Contents for SIP-T9CM










Reviews: