Enterprise IP Phone Using the Basic Phone Functions
- 43 -
1)
Press the following hot keys: MENU->Features->Call Completion to enter the
configuration page.
2)
By the Left/Right navigation keys, choose whether to enable this option.
3)
Press the OK to save your changes.
Answering a call
Answering an incoming call
1)
If you are not on another phone, lift the handset using, or press the Speaker button
to answer it using the speakerphone, or press the headset button to answer it using
the headset.
2)
If you are on another call, press the corresponding line key or OK button to answer
it.
During the conversation, you can alternate between Headset, Handset and Speaker
phone by pressing the corresponding buttons or picking up the handset.
Denying an incoming call
Press the X key to deny the incoming call directly.
DND
If users enable the DND function, all the incoming calls will be rejected and the display
shows:
icon; You can find the incoming call record in the Call History.
To configure the DND function via Phone interface:
1)
Go to MENU->Features->DND option to enter the configuration interface.
2)
Use the navigation keys to choose Enable/Disable.
3)
Press the OK button to save the changes.
4)
Choose DND option again to
deactivate DND mode.
You can also set DND function by the DND Code:
1)
Go to MENU->Features->DND to enter the configuration interface.
2)
Set the DND On Code and the DND Off Code, then press the OK button to save the
changes.
3)
When you enable the DND function, the phone will send a message to the server,
and the server will turn on the DND function. Then any calls to the extension will be
rejected by the server automatically. And the incoming call record will not be
displayed in the Call History.
