Enterprise IP Phone Using the Basic Phone Functions
- 46 -
During an Active Call
Mute
This function allows you to mute the microphone of the active audio device during a call;
you can not be heard by the other party. You can still hear all other parties while mute
is enabled.
To mute/resume the conversation:
Press
button during a conversation to mute the current call, the icon
will be
shown on the LCD, and the power indication LED will blink. Press
again to get the
microphone return to normal conversation. When you press the MUTE button all of the
conversations will be muted
Call Hold
This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call:
1)
Press the HOLD button to put your active call on hold.
2)
During the call, there will be a "dodo.." sound for each 30 second, suggesting that
there is a current call in Hold state.
3)
If there is only one call on hold, press the HOLD button again to retrieve the call.
4)
If there is more than one call on hold, press the Up/Down button to highlight the
call, then press the HOLD button again to retrieve the call.
Note:
When you are under the call hold status, putting down the handset, the conversation
will go on over the speaker instead of hanging up the call.
Call Waiting
This call feature allows your phone to accept other incoming calls to the extension no
matter under which circumstances.
To enable/disable Call Waiting via Phone interface:
1)
Press MENU->Features->Call Waiting->OK button.
2)
Use the navigation keys to active/inactive call waiting.
3)
Use the navigation keys to enable/disable the Play Tone option.
This option used to
define whether to play ring tones when there is call incoming during an active call.
4)
Press OK button to save the changes, or MENU to return to the previous menu.
