Enterprise IP Phone Using the Advanced Phone Functions
- 61 -
1)
Go to Menu->Settings->Advanced Settings-> Auto Provision.
2)
Enter the URL, User Name and Password.
3)
Click the Save hot key to save the changes.
The parameters of the Autoprovision
：
Parameter
Description
Update Protocol
The phone can be updated via TFTP, FTP or HTTP.
TFTP Server
If you choose TFTP as protocol TFTP, you need to enter the TFTP
server IP address and port.
Check new config
You can specific the period that your phone checks the new
firmware from the server: Power on, Repeatedly, Weekly, Power
on + Repeatedly, Power on + Weekly and Disabled.
Scheduling
You can specific the period in days which the phone checks and
updates the new firmware, the range is 1-30 days.
Note:
1.
Any power interruption during the following process will most likely lead to a flash
memory error. As a result the system cannot boot up anymore.
2.
The upgrade priority is PNP, Custom Option, URL by descending.
3.
Users can also delete some configuration options by Auto-provision, for example,
to delete the admin password.
Decryption
This IP phone can support y000000000007.cfg and mac.cfg files encryption and
decryption for user authentication to realize
s
ecurity usage. If there are any encrypted
y000000000007.cfg or mac.cfg files on the server, users can open the webpage of your
IP phone.
Go to Upgrade->Advanced, choose and fill in the Common AES Key (for
y000000000007.cfg and MAC-Oriented AES Key (for mac.cfg) option, then click the
Confirm button to decryption the files and upgrade to the new version. Shown as below:
