Enterprise IP Phone Using the Advanced Phone Functions
- 72 -
Record
Call recording is a phone function to record the conversation in the process of dialogue.
Using this feature, please pay attention to the maximum recording time and frequency
in advance. Generally, it maybe a few minutes.
To assign the key as Record:
1)
Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Record option from
the list.
2)
Press Confirm button to save the changes.
Prefix
When you set up the function of prefix, press this key, the phone will be ready to make
a new call, and show up the content which your set previously on the dail interface. And
you could enter other figure and call out
To assign the key as Prefix:
1)
Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, and choose Prefix from the
list, and enter the number you want to show up on the dial interface in the Value
field.
2)
Press Confirm button to save the changes
Zero-sp-touch
You can also press the DSSKey which set as the Zero-sp-touch. Then press the DSSKey,
the phone will turn to the Zero-sp-touch interface.
To assign the key as Zero-sp-touch:
1)
Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, and choose Zero-sp-touch
from the list.
2)
Press Confirm button to save the changes
ACD
ACD(Automatic Call Distribution) is automatic call distribution equipment, is according
specific Transfer Rules and distribution strategy to switch the access call to the right
person.
1)
Presses DSSKey, it will pop up a login box, enter the User ID and Password, click OK
button to login.
2)
Presses DSSKEY again enter to the ACD page, press OK button to change the
Available/Unavailable status.
