Enter the Call Forward path: Menu->Features->Enter->Call Forward->Enter
There are 3 options: Always Forward, Busy Forward and No Answer Forward
Press the Save softkey to save the changes
Choose one of them, and enter the phone number you want to forward; If you choose “No Answer
Forward”, you should also set the “After Ring Times” option
A press TRAN Button or Transfer softkey to put B on hold followed with dialing C and pressing the
Transfer softkey to call out.
A would be on hold and the LCD would display as Transferred. A could press the Cancel softkey button
to be disconnected from the call.
If C picks up the phone call, B would be able to talk to C.
A press the TRAN button or Transfer softkey to put B on hold followed with dialing C and pressing the
OK or SEND button to call out.
While C is ringing, A hang up or press the Transfer softkey. Then A will turn to the hold status, and the
LCD will display as Transferred
A will be disconnected from the call, when C pick up, B can talk to C
A press TRAN Button or Transfer softkey to put B on hold followed with dialing C and press the OK or
SEND button to call out
After C answered it, A and C can have a private conversation without B, then A press Tran button to
complete the transfer
A will be disconnected from the call. B can talk to C
If A and B are on a conversation and B may want A to transfer the call to C, three ways could
be used to transfer the call: Blind Transfer, Attended Transfer, and Semi-Attended Transfer.
User can check the status of IP phone: IP address, MAC, Firmware,etc.
V60.0
You can download the latest user manuals from our website:
http://www.yealink.com/en/download.asp?BigClassName=IP%20Phone
