Enterprise IP Phone Using the Basic Call Functions
- 53 -
will go on over the speaker instead of hanging up the call.
Call Waiting
This call feature allows your phone to accept other incoming calls to the extension no
matter under which circumstances.
To enable/disable Call Waiting via Phone interface:
1)
Press Menu->Features->Call Waiting hot keys.
2)
Use the navigation keys or Disable/Enable hot key to active/inactive call waiting.
3)
Use the navigation keys or Switch hot key to enable/disable the Play Tone option.
This option used to define whether to play ring tones when there is call incoming during
an active call.
4)
Press Save hot keys to save the changes, or Back hot key to return to the previous
menu.
To enable/disable Call Waiting via Web interface:
Choose Phone->Features->Call Waiting to do the relating changes.
Call Transfer
You can customize your phone so that incoming calls are transferred directly to the third
party such as another extension, mobile phone number, etc. There are three ways to
transfer the call: Blind Transfer, Attended Transfer and Semi-Attended Transfer.
To Blind Transfer via phone interface:
1)
A and B is on an conversation, A press TRAN Button or Tran hot key to put B on hold,
then A can dial the third telephone number C (or press Directory soft key to enter
the contact list, then choose a record) and press the Tran hot key to call out. A will
turn to the hold status, and the LCD will display as Transferred.
2)
After the C answered it, or A press the Cancel hot key to complete the transfer.
3)
A will be disconnected from the call. B can talk to C.
4)
If C refused to answer the call, it will prompt A that the transfer operation is failed.
If the current mode is speaker, it will ring up; if the current mode is handset or
headset, it will play ring tones for every five seconds. Pressing any function keys to
exit the prompt interface. This function should be supported by server.
To Attended Transfer via phone interface:
1)
A and B is on an conversation, A press TRAN Button or Tran hot key to put B on hold,
then A can dial the third telephone number C (or press Directory soft key to enter
the contact list, then choose a record) and press the OK or SEND button to call out.
