Enterprise IP Phone Using the Advanced Phone Functions
- 70 -
1)
Choose Upgrade->Basic->Browse, select the firmware file in your local computer.
2)
Click Upgrade button to update the new firmware.
To update the firmware automatically via Web interface:
1)
Choose Upgrade->Advanced, configure the relating settings: Custom Option,
Custom Option Type, URL, Account, Password, Common AES Key and
MAC-Oriented AES Key, PNP config and Check New Config etc.
2)
Choose Confirm button, the phone will check the server for a new firmware in a
specific time, and it updates automatically if there is new firmware.
3)
You can also update the firmware immediately by pressing Auto-provision button.
Set Auto Provision via phone interface:
1)
Go to Menu->Settings->Advanced Settings-> Auto Provision.
2)
Enter the URL, User Name and Password.
3)
Click the Save hot key to save the changes.
Note:
1.
Any power interruption during the following process will most likely lead to a flash
memory error. As a result the system cannot boot up anymore..
2.
The upgrade priority is PNP, Custom Option, URL by descending.
3.
Users can also delete some configuration options by Auto-provision, for example,
to delete the admin password.
Decryption
This IP phone can support y000000000005.cfg and mac.cfg files encryption and
decryption for user authentication to realize
s
ecurity usage. If there are any encrypted
y000000000005.cfg or mac.cfg files on the server, users can open the webpage of your
IP phone. Go to Upgrade->Advanced, choose and fill in the Common AES Key (for
y000000000005.cfg, should be 16 bit) and MAC-Oriented AES Key (for mac.cfg, should
be 16 bit) option, then click the Confirm button to decryption the files and upgrade to
the new version. Shown as below:
